Product Description
Facts about the manual you will be receiving:
- This manual is printed by eKeyBlanks with permission by JMA.
- This is the manual that originally came with the key machine.
This instruction manual contains the following sections:
1. MACHINE OVERVIEW
1.1 GENERAL ASPECTS
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. MACHINE CHARACTERISTICS
2.1 KEY TYPES
2.2 ACCESSORIES
2.3 TOOLBOX (OPTIONAL)
2.4 ELECTRICAL CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGE OF THE CUTTER AND TRACER (19)
2.7.2 LOCKAGE OF CARRIAGE AT THE END OF ITS RUN “Y” AXIS
2.7.3 JAW(6)
2.7.4 TRACER SPRING-LOAD (11)
2.7.5 SPRING LOADING AND LOCKING OF THE CARRIAGE ON AXIS “X” (5 AND 4)
2.7.6 MAINS SWITCH AND MOTOR SWITCH (15 AND 16)
2.7.7 SCREEN-KEYBOARD (1)
2.7.8 VERTICAL REGULATION OF THE TRACER (14)
3. KEY CUTTING
3.1 KEY CUTTING PROCESS
3.2 KEY CUTTING WITH STANDARD JAW
3.2.1 SEA-1 KEY
3.2.2 OP-WH.P AND OP-WY.P KEYS
3.2.3 ME-3.P AND ME-4.P
3.2.4 JIS-4.P KEY
3.2.5 FO-6.P KEY
3.2.6 MCM-10 KEY
3.2.7 TE-T60 AND TE-T80 KEYS
3.3 KEY CUTTING WITH OPTIONAL TUBULAR JAW
3.3.1 TUBULAR KEYS
3.3.2 FIC-2 AND RC-3 KEYS
3.3.3 WIN-1D, WIN-2D, WIN-3D AND WIN-4D KEYS
4. MAINTENANCE
4.1 REPLACEMENT OF THE JAW CHUCK
4.2 ADJUSTMENT OF THE CHUCKS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACEMENT OF FUSES
4.4 TENSING AND REPLACEMENT OF THE BELT
4.5 REPLACEMENT OF THE MOTOR
4.6 REPLACEMENT OF THE SCREEN-KEYBOARD
4.7 REPLACEMENT OF THE ELECTRONIC CONTROL BOARD
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. ADAPTOR-INCLINATION-TRACER-CUTTER-KEY TABLE
8. ASSEMBLY DRAWING
1.1 GENERAL ASPECTS
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. MACHINE CHARACTERISTICS
2.1 KEY TYPES
2.2 ACCESSORIES
2.3 TOOLBOX (OPTIONAL)
2.4 ELECTRICAL CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGE OF THE CUTTER AND TRACER (19)
2.7.2 LOCKAGE OF CARRIAGE AT THE END OF ITS RUN “Y” AXIS
2.7.3 JAW(6)
2.7.4 TRACER SPRING-LOAD (11)
2.7.5 SPRING LOADING AND LOCKING OF THE CARRIAGE ON AXIS “X” (5 AND 4)
2.7.6 MAINS SWITCH AND MOTOR SWITCH (15 AND 16)
2.7.7 SCREEN-KEYBOARD (1)
2.7.8 VERTICAL REGULATION OF THE TRACER (14)
3. KEY CUTTING
3.1 KEY CUTTING PROCESS
3.2 KEY CUTTING WITH STANDARD JAW
3.2.1 SEA-1 KEY
3.2.2 OP-WH.P AND OP-WY.P KEYS
3.2.3 ME-3.P AND ME-4.P
3.2.4 JIS-4.P KEY
3.2.5 FO-6.P KEY
3.2.6 MCM-10 KEY
3.2.7 TE-T60 AND TE-T80 KEYS
3.3 KEY CUTTING WITH OPTIONAL TUBULAR JAW
3.3.1 TUBULAR KEYS
3.3.2 FIC-2 AND RC-3 KEYS
3.3.3 WIN-1D, WIN-2D, WIN-3D AND WIN-4D KEYS
4. MAINTENANCE
4.1 REPLACEMENT OF THE JAW CHUCK
4.2 ADJUSTMENT OF THE CHUCKS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACEMENT OF FUSES
4.4 TENSING AND REPLACEMENT OF THE BELT
4.5 REPLACEMENT OF THE MOTOR
4.6 REPLACEMENT OF THE SCREEN-KEYBOARD
4.7 REPLACEMENT OF THE ELECTRONIC CONTROL BOARD
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. ADAPTOR-INCLINATION-TRACER-CUTTER-KEY TABLE
8. ASSEMBLY DRAWING
