Product Description
Facts about the manual you will be receiving:
- This manual is printed by eKeyBlanks with permission by JMA.
This instruction manual contains the following sections:
1. MACHINE OVERVIEW
1.1 GENERAL ASPECTS
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. MACHINE CHARACTERISTICS
2.1 KEY TYPES
2.2 ACCESSORIES
2.3 TOOLBOX
2.4 ELECTRIC CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGING THE CUTTER AND TRACER POINT (21)
2.7.2 BLOCKING THE SLIDE AT THE END OF THE “Y” AXIS TRAVEL
2.7.3 CLAMP (6)
2.7.4 TRACER POINT SPRING MECHANISM (11)
2.7.5 SPRING MECHANISM AND BLOCKING THE SLIDE ON THE “X” AXIS (5 AND 4)
2.7.6 SUPPORT LEVER FOR TUBULAR KEYS
2.7.7 CUTTER SPEED (17)
2.7.8 KEYPAD-DISPLAY (1)
2.7.9 VERTICAL ADJUSTMENT OF THE TRACER POINT (15)
2.7.10 CONTROL OF CUTTING FORCE
3. KEY CUTTING
3.1 KEY CUTTING PROCESS
3.2 KEY CUTTING
3.2.1 KA-2, KA-3 AND KA-4 KEYS.
3.2.2 KE-1 KEY.
3.2.3 SEA-1 KEY.
3.2.4 OP-WH.P AND OP-WY.P KEYS
3.2.5 ME-4.P, ME-6.P, ME-7.P, ME-8.P, ME-11.P AND ME-12.P
3.2.6 TUBULAR KEYS
3.2.7 CISA KEYS
3.2.8 HU-HAA KEY
3.2.9 NARROW CHANNEL KEYS
3.2.10 TE-12P KEY
3.2.11 FIC-2 AND FIC-3 KEYS
3.2.12 WIN-1D, WIN-2D, WIN-3D AND WIN-4D KEYS.
3.2.13 JIS-4.P KEY
3.2.14 FO-6.P KEY
3.2.15 MCM-10 KEY
3.2.16 TE-T60 AND TE-T80 KEYS
4. MAINTENANCE
4.1 REPLACING THE CLAMP JAWS
4.2 ADJUSTING THE JAWS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACING THE FUSES
4.4 TIGHTENING AND REPLACING THE BELT
4.5 REPLACING THE MOTOR
4.6 REPLACING THE KEYPAD-DISPLAY
4.7 REPLACING THE ELECTRONIC CONTROL CARD
4.8 REPLACING THE POWER CARD AND CIRCUIT BREAKER
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. KEY-CUTTER-TRACER POINT-ANGLE CUT-ADAPTOR TABLE
8. ASSEMBLY DRAWING
1.1 GENERAL ASPECTS
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. MACHINE CHARACTERISTICS
2.1 KEY TYPES
2.2 ACCESSORIES
2.3 TOOLBOX
2.4 ELECTRIC CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGING THE CUTTER AND TRACER POINT (21)
2.7.2 BLOCKING THE SLIDE AT THE END OF THE “Y” AXIS TRAVEL
2.7.3 CLAMP (6)
2.7.4 TRACER POINT SPRING MECHANISM (11)
2.7.5 SPRING MECHANISM AND BLOCKING THE SLIDE ON THE “X” AXIS (5 AND 4)
2.7.6 SUPPORT LEVER FOR TUBULAR KEYS
2.7.7 CUTTER SPEED (17)
2.7.8 KEYPAD-DISPLAY (1)
2.7.9 VERTICAL ADJUSTMENT OF THE TRACER POINT (15)
2.7.10 CONTROL OF CUTTING FORCE
3. KEY CUTTING
3.1 KEY CUTTING PROCESS
3.2 KEY CUTTING
3.2.1 KA-2, KA-3 AND KA-4 KEYS.
3.2.2 KE-1 KEY.
3.2.3 SEA-1 KEY.
3.2.4 OP-WH.P AND OP-WY.P KEYS
3.2.5 ME-4.P, ME-6.P, ME-7.P, ME-8.P, ME-11.P AND ME-12.P
3.2.6 TUBULAR KEYS
3.2.7 CISA KEYS
3.2.8 HU-HAA KEY
3.2.9 NARROW CHANNEL KEYS
3.2.10 TE-12P KEY
3.2.11 FIC-2 AND FIC-3 KEYS
3.2.12 WIN-1D, WIN-2D, WIN-3D AND WIN-4D KEYS.
3.2.13 JIS-4.P KEY
3.2.14 FO-6.P KEY
3.2.15 MCM-10 KEY
3.2.16 TE-T60 AND TE-T80 KEYS
4. MAINTENANCE
4.1 REPLACING THE CLAMP JAWS
4.2 ADJUSTING THE JAWS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACING THE FUSES
4.4 TIGHTENING AND REPLACING THE BELT
4.5 REPLACING THE MOTOR
4.6 REPLACING THE KEYPAD-DISPLAY
4.7 REPLACING THE ELECTRONIC CONTROL CARD
4.8 REPLACING THE POWER CARD AND CIRCUIT BREAKER
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. KEY-CUTTER-TRACER POINT-ANGLE CUT-ADAPTOR TABLE
8. ASSEMBLY DRAWING
