Product Description
Facts about the manual you will be receiving:
- This manual is printed by eKeyBlanks with permission by JMA.
- This is the manual that originally came with the key machine.
This instruction manual contains the following sections:
1. MACHINE OVERVIEW
1.1 General aspects
1.2 Transport and packing
1.3 Identification label
2. MACHINE CHARACTERISTICS
2.1 Parts of the key
2.2 Main elements of the machine
2.3 Technical data
2.4 Components and functional parts
2.4.1 Accessories
2.4.2 Electric circuit
2.4.3 Clamps
2.4.3.1 Four-sided standard clamp M-4l
2.4.3.2 Special for Portugal. M-4l-s
2.4.3.3 Special M-d12
3. HOW TO OPERATE THE MACHINE
3.1 Display functions
3.2 Changing the side on the clamp
3.3 Adjustment by electrical contact
3.3.1 Depth adjustment
3.3.2 Side adjustment
3.4 Conventional Adjustment (with no electrical contact)
3.4.1 Depth adjustment (with no electrical contact)
3.4.2 Side adjustment
3.5 Key cutting
3.5.1 Cutting keys with a narrow blade
3.5.2 Cutting keys without shoulders
3.5.3 Cutting cross-shaped keys
4. MAINTENANCE
4.1 Replacing the brush
4.2 Replacing the cutter
4.3 Replacing the tracer
4.4 Adjusting the maximum depth of the slide
4.5 Replacing the fuses
4.6 Replacing the start switch and the brush button
4.7 Replacing and/or tightening the belt
4.8 Replacing the motor
4.9 Replacing the motor capacitor
4.10 Replacing the clamp raising cam
4.11 Access to the inside of the slide
4.12 Tightening the slide spring
4.13 Access to the bottom area
4.14 Replacing the microswitches
4.15 Replacing the display
4.16 Replacing the electronic card
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. ASSEMBLY DRAWING
1.1 General aspects
1.2 Transport and packing
1.3 Identification label
2. MACHINE CHARACTERISTICS
2.1 Parts of the key
2.2 Main elements of the machine
2.3 Technical data
2.4 Components and functional parts
2.4.1 Accessories
2.4.2 Electric circuit
2.4.3 Clamps
2.4.3.1 Four-sided standard clamp M-4l
2.4.3.2 Special for Portugal. M-4l-s
2.4.3.3 Special M-d12
3. HOW TO OPERATE THE MACHINE
3.1 Display functions
3.2 Changing the side on the clamp
3.3 Adjustment by electrical contact
3.3.1 Depth adjustment
3.3.2 Side adjustment
3.4 Conventional Adjustment (with no electrical contact)
3.4.1 Depth adjustment (with no electrical contact)
3.4.2 Side adjustment
3.5 Key cutting
3.5.1 Cutting keys with a narrow blade
3.5.2 Cutting keys without shoulders
3.5.3 Cutting cross-shaped keys
4. MAINTENANCE
4.1 Replacing the brush
4.2 Replacing the cutter
4.3 Replacing the tracer
4.4 Adjusting the maximum depth of the slide
4.5 Replacing the fuses
4.6 Replacing the start switch and the brush button
4.7 Replacing and/or tightening the belt
4.8 Replacing the motor
4.9 Replacing the motor capacitor
4.10 Replacing the clamp raising cam
4.11 Access to the inside of the slide
4.12 Tightening the slide spring
4.13 Access to the bottom area
4.14 Replacing the microswitches
4.15 Replacing the display
4.16 Replacing the electronic card
5. SAFETY
6. MACHINE WASTE
6.1 PACKING
6.2 SWARF
6.3 MACHINE
7. ASSEMBLY DRAWING
